Pset_MechanicalPanelOutOfPlaneNegative Properties for Mechanical Panels Out Of Plane Negative. IfcMaterial IfcMaterial YoungModulusBending Defining values: α; defined values: elastic modulus in bending. YoungModulusTension Defining values: α; defined values: elastic modulus in tension. YoungModulusCompression Elastic modulus in compression. ShearModulus A measure of the shear modulus of elasticity of the material. Shear Modulus BendingStrength Bending strength. Defining values: α; defined values: bending strength. CompressiveStrength The compressive strength of the object or material. Defining values: α; defined values: compressive strength. TensileStrength Indicates the ability to withstand breakage apart under applied force. ShearStrength Defining values: α; defined values: shear strength. BearingStrength Defining values: α; defined values: bearing strength of bolt holes, i.e. intrados pressure. RaisedCompressiveStrength Alternative value for compressive strength which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description. ReferenceDepth Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.