| Name | Type | Description |
|---|
| LiningDepth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
The depth of the lining.
For a door, it is the depth of the door lining, measured perpendicular to the plane of the door lining. If omitted (and with a given value to lining thickness) it indicates an adjustable depth (i.e. a depth that adjusts to the thickness of the wall into which the occurrence of this door style is inserted).
|
| LiningThickness |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
Thickness of the lining.
For a door, it is the thickness of the door lining as explained in the figure above. If LiningThickness value is 0. (zero) it denotes a door without a lining (all other lining parameters shall be set to NIL in this case). If the LiningThickness is NIL it denotes that the value is not available.
|
| ThresholdDepth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
Depth (dimension in plane perpendicular to door leaf) of the door threshold. Only given if the door lining includes a threshold. If omitted (and with a given value to threshold thickness) it indicates an adjustable depth (i.e. a depth that adjusts to the thickness of the wall into which the occurrence of this door style is inserted).
|
| ThresholdThickness |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
Thickness of the door threshold as explained in the figure above. If ThresholdThickness value is 0. (zero) it denotes a door without a threshold (ThresholdDepth shall be set to NIL in this case). If the ThresholdThickness is NIL it denotes that the information about a threshold is not available.
|
| TransomThickness |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
Thickness of the transom.
For a door, it is the thickness (width in plane parallel to door leaf) of the transom (if provided - that is, if the TransomOffset attribute is set), which divides the door leaf from a glazing (or window) above. If the TransomThickness is set to zero (and the TransomOffset set to a positive length), then the door is divided vertically into a leaf and transom window area without a physical frame.
|
| TransomOffset |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Offset of the transom (if given) which divides the door leaf from a glazing (or window) above. The offset is given from the bottom of the door opening.
|
| LiningOffset |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Offset of the lining.
For a door, it is the offset (dimension in plane perpendicular to door leaf) of the door lining. The offset is given as distance to the x axis of the local placement.
|
| ThresholdOffset |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Offset (dimension in plane perpendicular to door leaf) of the door threshold. The offset is given as distance to the x axis of the local placement. Only given if the door lining includes a threshold and the parameter is known.
|
| CasingThickness |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
Thickness of the casing.
For a door, it is the dimension in plane of the door leaf. If given it is applied equally to all four sides of the adjacent wall.
|
| CasingDepth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
Depth of the casing.
For a door, it is the dimension in the plane perpendicular to door leaf. If given it is applied equally to all four sides of the adjacent wall.
|
| LiningToPanelOffsetX |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Offset between the lining and the panel, measured along the x-axis of the local placement.
For a door, it is the offset between the lining and the window panel.
|
| LiningToPanelOffsetY |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Offset between the lining and the panel, measured along the y-axis of the local placement.
For a door, it is the offset between the lining and the door panel.
|
PSD-XML
Link to this page