| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
 | 参照 | 当該プロジェクトで定義する形式の参照ID（例：A-1)、承認された分類に存在しないときに使用される。
|
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素（主にリノベーションまたは改修プロジェクトにおいて）の状態。 状態は、「新規(New)」－新しく追加される要素。「既存」－要素は存在し、かつ残りもの。「破壊」－要素は存在したが、廃棄されるもの。「一時的」－一時的に存在する要素（一時的にサポートしている構造のようなもの）。
|
|
| NumberOfGangs |
P_SINGLEVALUE
/
IfcCountMeasure
|
| Number Of Gangs | Number of gangs in the object.
Number of slots available for switches/outlets (most commonly 1, 2, 3, or 4).
|
| 分岐の数 | スロットスイッチ/コンセント（最も一般的に1、2、3、または4）で使用可能な数。
|
|
| ClearDepth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Clear Depth | The clear depth.
It indicates the unobstructed depth available for cable inclusion within the junction box.
|
| 明確な深さ | ジヤンクションボックスにケーブルを収められる深さ。
|
|
| ShapeType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_JunctionBoxShapeType |
| Shape Type | Shape of the junction box.
|
| 形状 | ジヤンクションボックスの形状。
|
|
| PlacingType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_JunctionBoxPlacingType |
| Placing Type | Location at which the type of junction box can be located.
|
| 位置 | ジヤンクションボックスの配置場所。
|
|
| JunctionBoxMountingType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_JunctionBoxMountingType |
| Mounting Type | Method of mounting to be adopted for the type of junction box.
|
| 取り付け | ジヤンクションボツクスの取り付け方法。
|
|
| IsExternal |
P_SINGLEVALUE
/
IfcBoolean
|
| Is External | Indication whether the element is designed for use in the exterior (TRUE) or not (FALSE). If (TRUE) it is an external element and faces the outside of the building.
|
| 外部露出 | ジャンクションボックスが外部露出の許可がされているかどうかを表示（外部露出が許可されている場合は設定）。
|
|
| IP_Code |
P_SINGLEVALUE
/
IfcLabel
* |
| IP_ Code | IP Code, the International Protection Marking, IEC 60529), classifies and rates the degree of protection provided against intrusion.
|
|
| NominalLength |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
| Nominal Length | The nominal overall length of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
|
|
| NominalWidth |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
| Nominal Width | The nominal overall width of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
|
| 公称幅 | 呼び幅寸法。
|
|
| NominalHeight |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
The nominal height of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
|
PSD-XML
Link to this page