| Name | Type | Description |
|---|
| AdjustmentValueType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_AdjustmentValueType |
 | Adjustment Value Type | The type of adjustment value that is applied through the property set. This determines the properties that should be asserted (see below).
|
 | 調整値の型 | 調整値のタイプを設定。
|
|
| TimeAdjustmentRange |
P_BOUNDEDVALUE
/
IfcTimeMeasure
|
| Adjustment Range | Upper and lower time adjustment limits for an AdjustmentValueType = RANGE. Note that this property should not have a value for an AdjustmentValueType = LIST.
|
| 調整範囲 | 時間調整の範囲の上限値と下限値を設定。一覧表ではもっていない事を注意。
|
|
| TimeAdjustmentRangeStepValue |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Adjustment Range Step Value | Step value of time adjustment for an AdjustmentValueType = RANGE. Note that this property should not have a value for an AdjustmentValueType = LIST.
|
| 調整範囲のステップ値 | 時間調整の範囲をステップ値を設定。一覧表ではもっていない事を注意。
|
|
| TimeAdjustmentValues |
P_LISTVALUE
/
IfcTimeMeasure
|
| Adjustment Values | A list of time adjustment values that may be applied to a tripping unit for an AdjustmentValueType = LIST. A minimum of 1 and a maximum of 16 adjustment values may be specified. Note that this property should not have a value for an AdjustmentValueType = RANGE.
|
| 調整値 | 時間調整値を１から16で設定。範囲では、ない事を注意。
|
|
| AdjustmentDesignation |
P_SINGLEVALUE
/
IfcLabel
|
| Adjustment Designation | The desgnation on the device for the adjustment.
|
| 調整の指定 | 調整する装置の指定。
|
|
| CurrentForTimeDelay |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Current For Time Delay | The tripping current in [x In] at which the time delay is specified. A value for this property should only be asserted for time delay of L-function, and for I2t of the S and G function.
|
| 時延電流 | 時延[x]ののトリップ電流は、L関数の遅延時間、およびSとG関数のI2tを指定。
|
|
| I2TApplicability |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_AdjustmentValueType |
| I2 TApplicability | The applicability of the time adjustment related to the tripping function.
|
| I2Tの適用 | トリップ機能の時延を求める時に適用する関数。
|
|
PSD-XML
Link to this page