Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| Etat | Etat de l'élément, utilisé avant tout pour les projets de rénovation et réaménagement. L'état assigné peut être "Nouveau" - l'élément prévu pour du neuf, "Existant" - l'élément existait et est maintenu, "Démoli" - l'élément existait mais doit être démoli/supprimé, "Provisoire" - l'élément existera à titre provisoire seulement (comme un support structurel par exemple).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
OperationalTemperatureRange |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
* |
| Operational Temperature Range | The temperature range in which the device operates normally.
Allowable operation ambient air temperature range.
|
| PlageTempératureOpérationelle | Opération admise sur la plage de température de l'air ambiant
|
| 動作温度範囲 | 動作を許容する周囲温度の範囲
|
|
AirFlowRateRange |
P_BOUNDEDVALUE
/
IfcVolumetricFlowRateMeasure
|
| Airflow Rate Range | Possible range of airflow that can be delivered.
For cases where there is no airflow across the coil (e.g. electric coil in a floor slab), then the value is zero.
|
| PlageDébitAéraulique | Plage possible de débit aéraulique pouvant être délivré. Pour les cas où il n'y a pas de débit à travers la batterie (par ex. batterie électrique en plancher), alors la valeur est zéro.
|
|
NominalSensibleCapacity |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Nominal Sensible Capacity | Nominal sensible capacity.
|
| PuissanceSensibleNominale | Puissance sensible nominale.
|
|
NominalLatentCapacity |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Nominal Latent Capacity | Nominal latent capacity.
|
| PuissanceLatenteNominale | Puissance latente nominale.
|
|
NominalUA |
P_SINGLEVALUE
/
IfcReal
|
| Nominal UA | Nominal UA value.
|
| UANominale | Valeur nominale du coefficient de transmission thermique totale.
|
|
CoilPlacement |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_CoilPlacementType |
| Placement Type | Indicates the placement of the coil.
FLOOR indicates an under floor heater (if coil type is WATERHEATINGCOIL or ELECTRICHEATINGCOIL);
CEILING indicates a cooling ceiling (if coil type is WATERCOOLINGCOIL);
UNIT indicates that the coil is part of a cooling or heating unit, like cooled beam, etc.
|
| TypeImplantation | Précise l'implantation de la batterie.
PLANCHER indique que c'est un plancher chauffant (si le type de batterie is BATTERIEEAUCHAUDE ou CABLECHAUFFANTLECTRIQUE);
PLAFOND indique un plafond rafraïchissant (si le type de la batterie est BATTERIEEAUFROIDE); UNITE indique que la batterie fait partie d'une unité de chauffage ou de refroidissement, tel que poutre froide, etc.
|
|