| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
 | 参照 | 当該プロジェクトで定義する形式の参照ID（例：A-1)、承認された分類に存在しないときに使用される。
|
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素（主にリノベーションまたは改修プロジェクトにおいて）の状態。 状態は、「新規(New)」－新しく追加される要素。「既存」－要素は存在し、かつ残りもの。「破壊」－要素は存在したが、廃棄されるもの。「一時的」－一時的に存在する要素（一時的にサポートしている構造のようなもの）。
|
|
| HydraulicDiameter |
P_SINGLEVALUE
/
IfcLengthMeasure
|
| Hydraulic Diameter | Hydraulic diameter.
|
| 水力直径 | 水力直径
|
|
| Length |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Length | The length of the object.
|
| 長さ | ピット長さ。
|
|
| Weight |
P_SINGLEVALUE
/
IfcMassMeasure
|
| Weight | Total weight of object
|
| 重さ | サイレンサ重量
|
|
| AirFlowRateRange |
P_BOUNDEDVALUE
/
IfcVolumetricFlowRateMeasure
|
| Air Flowrate Range | Possible range of airflow that can be delivered.
|
| 流量範囲 | 送風可能な風量範囲
|
|
| WorkingPressureRange |
P_BOUNDEDVALUE
/
IfcPressureMeasure
|
| Working Pressure Range | Allowable minimum and maximum working pressure (relative to ambient pressure).
|
| 作動圧力範囲 | 許容最小・最大作動圧力（周囲圧との相対値）
|
|
| TemperatureRange |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Temperature Range | Allowable maximum and minimum temperature.
|
| 温度範囲 | 許容最低・最高温度
|
|
| HasExteriorInsulation |
P_SINGLEVALUE
/
IfcBoolean
|
| Has Exterior Insulation | TRUE if the silencer has exterior insulation. FALSE if it does not.
|
| 外部保温 | サイレンサに外部保温があるときTRUE
|
|
PSD-XML
Link to this page