7.5.4.47 Pset_EvaporativeCoolerTypeCommon

PSET_TYPEDRIVENOVERRIDE / IfcEvaporativeCooler

Evaporative Cooler Type CommonEvaporative cooler type common attributes. Sound attribute deleted in IFC2x2 Pset Addendum: Use IfcSoundProperties instead. WaterRequirement attribute unit type modified in IFC2x2 Pset Addendum.
蒸発冷却器共通属性を設定 Sound属性がIFC2x2 psetの付録で削除された:IfcSoundPropertiesを代わりに使用します。 WaterRequirement属性ユニットタイプはIFC2x2 psetの付録で変更された。
Properties

PSD-XML

NameTypeDescription
Reference P_SINGLEVALUE / IfcIdentifier
ReferenceReference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION  The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
参照当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
Status P_ENUMERATEDVALUE / IfcLabel / PEnum_ElementStatus
StatusStatus of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
状態要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
FlowArrangement P_ENUMERATEDVALUE / IfcLabel / PEnum_EvaporativeCoolerFlowArrangement
Flow ArrangementDefines the basic flow arrangements for the heat exchanger or cooler tower: COUNTERFLOW: Air and water flow enter in different directions. CROSSFLOW: Air and water flow are perpendicular. PARALLELFLOW: Air and water flow enter in same directions. MULTIPASS: Multipass flow heat exchanger arrangement. OTHER: Other type of heat exchanger flow arrangement not defined above.
流れ種類カウンタフロー:空気と水の流れが逆方向で入る クロスフロー:空気と「水の流れが垂直 平行流:空気と水の流れが同じ方向で入る
HeatExchangeArea P_SINGLEVALUE / IfcAreaMeasure
Heat Exchange AreaHeat exchange area.
熱交換面積熱交換面積
OperationTemperatureRange P_BOUNDEDVALUE / IfcThermodynamicTemperatureMeasure
Operation Temperature RangeAllowable operation ambient air temperature range.
動作温度範囲許容作動周囲空気温度範囲
WaterRequirement P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Water RequirementMake-up water requirement.
水要件水の要件
EffectivenessTable P_TABLEVALUE / IfcVolumetricFlowRateMeasure / IfcReal
Effectiveness TableTotal heat transfer effectiveness curve as a function of the primary air flow rate.
AirPressureDropCurve P_TABLEVALUE / IfcVolumetricFlowRateMeasure / IfcPressureMeasure
Air Pressure Drop CurveAir pressure drop as a function of air flow rate.
WaterPressDropCurve P_TABLEVALUE / IfcVolumetricFlowRateMeasure / IfcPressureMeasure
Water Press Drop CurveWater pressure drop as function of water flow rate.

Link to this page  Link to this page