Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
WorkingPressure |
P_SINGLEVALUE
/
IfcPressureMeasure
|
| Working Pressure | Working pressure.
|
| 動作圧 | 動作圧
|
|
PressureRange |
P_BOUNDEDVALUE
/
IfcPressureMeasure
|
| Pressure Range | Allowable maximum and minimum working pressure (relative to ambient pressure).
|
| 圧力範囲 | 許容最大/最小管内圧力(周囲圧力に比較して)
|
|
TemperatureRange |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Temperature Range | Allowable maximum and minimum temperature.
|
| 温度範囲 | 許容最大/最小温度
|
|
NominalDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Diameter | Nominal diameter or width of the object.
|
| 呼び径 | 配管部の呼び径、リストに一つの数字しかないとき、この呼び径が全ての管端に当てはまる。一つ以上の数字があるとき、呼び径はリストの表示に対応する管端にあてはまる。
|
|
InnerDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Inner Diameter | The actual inner diameter of the object.
|
| 内径 | 配管の実内径(リストの複数の数字の解釈については呼び径参照)
|
|
OuterDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Outer Diameter | The actual outer diameter of the object.
|
| 外径 | 配管の実外径(リストの複数の数字の解釈については呼び径参照)
|
|
Length |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
The length of the object.
|