Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
FlowRateRange |
P_BOUNDEDVALUE
/
IfcMassFlowRateMeasure
|
| Flow Rate Range | Allowable range of volume of fluid being pumped against the resistance specified.
|
| 流量範囲 | 指定された抵抗に対してポンプでくみ上げ可能な流対量の許容範囲
|
|
FlowResistanceRange |
P_BOUNDEDVALUE
/
IfcPressureMeasure
|
| Flow Resistance Range | Allowable range of frictional resistance against which the fluid is being pumped.
|
| 流体抵抗の範囲 | 流体をポンプでくみ上げる際の摩擦抵抗の許容範囲
|
|
ConnectionSize |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Connection Size | The connection size of the object.
The connection to and from the pump.
|
| 接続サイズ | ポンプの入出の接続サイズ
|
|
TemperatureRange |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Temperature Range | Allowable maximum and minimum temperature.
Allowable operational range of the fluid temperature.
|
| 温度範囲 | 流体温度の許容範囲
|
|
NetPositiveSuctionHead |
P_SINGLEVALUE
/
IfcPressureMeasure
|
| Net Positive Suction Head | Minimum liquid pressure at the pump inlet to prevent cavitation.
|
| 正味吸入側水頭 | キャビテーションを防ぐポンプ入口の最小限の流体圧力
|
|
NominalRotationSpeed |
P_SINGLEVALUE
/
IfcRotationalFrequencyMeasure
|
| Nominal Rotation Speed | Rotational speed of the object under nominal conditions.
Pump rotational speed under nominal conditions.
|
| 通常の回転速度 | 多目的な状況の下でのポンプの回転速度
|
|