Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
SpaceHeaterPlacement |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SpaceHeaterPlacementType |
| Placement Type | Indicates how the space heater is designed to be placed.
|
| プレースメントタイプ | 暖房用ヒーターが置かれるようにどう設計されているかを示します。
|
|
TemperatureClassification |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SpaceHeaterTemperatureClassification |
| Temperature Classification | Enumeration defining the temperature classification of the space heater surface temperature.
low temperature - surface temperature is relatively low, usually heated by hot water or electricity.
high temperature - surface temperature is relatively high, usually heated by gas or steam.
|
| 温度分類 | 暖房用ヒーター表面温度の温度分類を定義。低温タイプ-お湯またh電気によるものの表面温度は相対的に低い。高温タイプ-ガスまたは蒸気によって熱するタイプの表面温度は比較的高い。
|
|
HeatTransferDimension |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SpaceHeaterHeatTransferDimension |
| Heat Transfer Dimension | Indicates how heat is transmitted according to the shape of the space heater.
|
| 熱伝達値 | 室内暖房機の形に従って熱がどう伝えられるかを示します。
|
|
HeatTransferMedium |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_HeatTransferMedium |
| Heat Transfer Medium | Enumeration defining the heat transfer medium if applicable.
|
| 熱媒体 | 列挙体は熱媒体を必要に応じて定義します。
|
|
EnergySource |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_EnergySource |
| Energy Source | Enumeration defining the energy source or fuel cumbusted.
Note: hydronic heaters shall use UNSET; dual-use hydronic/electric heaters shall use ELECTRICITY.
|
| エネルギー源 | 列挙型はエネルギー源や燃料該当する場合は熱を発生させる燃焼定義します。注:温水循環式のヒーターはunsetを使用してはならない。デュアル使用すると、温水循環式の電気ヒーターは電気を使用しなければならない。
|
|
BodyMass |
P_SINGLEVALUE
/
IfcMassMeasure
|
| Body Mass | Overall body mass of the heater.
|
| 本体重量 | ヒーターの全体的な質量
|
|
ThermalMassHeatCapacity |
P_SINGLEVALUE
/
IfcReal
|
| Thermal Mass Heat Capacity | Product of component mass and specific heat.
|
| 保有熱容量 | 質量あたりの熱容量
|
|
OutputCapacity |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Output Capacity | Total nominal heat output as listed by the manufacturer.
|
| 出力 | メーカーによりリストアップされた公称熱出力
|
|
ThermalEfficiency |
P_SINGLEVALUE
/
IfcNormalisedRatioMeasure
|
| Thermal Efficiency | Overall Thermal Efficiency is defined as gross energy output of the heat transfer device divided by the energy input.
|
| 熱効率 | 熱効率:熱伝導装置の総エネルギー出力/エネルギー入力として総合的な熱効率は定義される。
|
|
NumberOfPanels |
P_SINGLEVALUE
/
IfcCountMeasure
|
| Number Of Panels | Number of panels.
|
| パネルの数 | パネルの数
|
|
NumberOfSections |
P_SINGLEVALUE
/
IfcCountMeasure
|
| Number Of Sections | Number of sections.
Number of vertical sections, measured in the direction of flow.
|
| セクションの数 | 流れ方向で測定した垂直方向のセクションの数
|
|