| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
 | 参照 | 当該プロジェクトで定義する形式の参照ID（例：A-1)、承認された分類に存在しないときに使用される。
|
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素（主にリノベーションまたは改修プロジェクトにおいて）の状態。 状態は、「新規(New)」－新しく追加される要素。「既存」－要素は存在し、かつ残りもの。「破壊」－要素は存在したが、廃棄されるもの。「一時的」－一時的に存在する要素（一時的にサポートしている構造のようなもの）。
|
|
| NumberOfRows |
P_SINGLEVALUE
/
IfcCountMeasure
|
| Number Of Rows | Number of tube rows in the tube bundle assembly.
|
| 列数 | チューブの集合の組立におけるチューブ列数
|
|
| StaggeredRowSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Staggered Row Spacing | Staggered tube row spacing.
|
| 互い違いの列間隔 | 互い違いのチューブ列間隔
|
|
| InLineRowSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| In Line Row Spacing | In-line tube row spacing.
|
| インライン列間隔 | インラインチューブ列間隔
|
|
| NumberOfCircuits |
P_SINGLEVALUE
/
IfcCountMeasure
|
| Number Of Circuits | Number of circuits.
Number of parallel fluid tube circuits.
|
| 平行流回路数 | 平行流チューブ回路数
|
|
| FoulingFactor |
P_SINGLEVALUE
/
IfcThermalResistanceMeasure
|
| Fouling Factor | Fouling factor of the tubes in the tube bundle.
|
| 汚れ係数 | チューブ束のチューブ汚れ係数
|
|
| ThermalConductivity |
P_SINGLEVALUE
/
IfcThermalConductivityMeasure
|
| Thermal Conductivity | The thermal conductivity of the object.
|
| 熱伝導率 | チューブの熱伝導率
|
|
| Length |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Length | The length of the object.
|
| 長さ | チューブ束のチューブ長さ
|
|
| Volume |
P_SINGLEVALUE
/
IfcVolumeMeasure
|
| Volume | Volume of the element.
Total volume of fluid in the tubes and their headers.
|
| 流量 | チューブとヘッダー内の総流量
|
|
| NominalDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Diameter | Nominal diameter or width of the object.
Nominal diameter or width of the tubes in the tube bundle.
|
| 公称直径 | チューブ束内のチューブ公称直径又は幅
|
|
| OutsideDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Outside Diameter | Actual outside diameter of the tube in the tube bundle.
|
| 外径 | チューブ束内のチューブ実外径
|
|
| InsideDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Inside Diameter | Actual inner diameter of the tube in the tube bundle.
|
| 内径 | チューブ束内のチューブ実内径
|
|
| HorizontalSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Horizontal Spacing | Horizontal spacing between tubes in the tube bundle.
|
| 水平間隔 | チューブ束内のチューブ間水平間隔
|
|
| VerticalSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Vertical Spacing | Vertical spacing between tubes in the tube bundle.
|
| 垂直間隔 | チューブ束内のチューブ間垂直間隔
|
|
| HasTurbulator |
P_SINGLEVALUE
/
IfcBoolean
|
| Has Turbulator | TRUE if the tube has a turbulator, FALSE if it does not.
|
| かくはん器有り | かくはん器有りの時 TRUE、無しの時 FALSE
|
|
PSD-XML
Link to this page