Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
EntranceLevel |
P_SINGLEVALUE
/
IfcBoolean
|
| Eingangsebene | Angabe, ob der Gebäudeeingang sich in diesem Geschoss befinded (WAHR), oder nicht (FALSCH).
|
| Entrance Level | Indication whether this building storey is an entrance level to the building (TRUE), or (FALSE) if otherwise.
|
| NiveauEntrée | Indication si l'étage est au niveau d'une entrée (VRAI) ou non (FAUX)
|
| エントランスレベル | エントランスレベルかどうかを示すブーリアン値。
|
|
AboveGround |
P_SINGLEVALUE
/
IfcLogical
|
| Oberirdisches Geschoss | Angabe, ob dieses Geschoss vollständig überhalb oberirdisch ist (WAHR), vollständig unterirdisch (FALSCH), oder teilweise unter- und überirdisch (UNKNOWN).
|
| Above Ground | Indication whether this building storey is fully above ground (TRUE), or below ground (FALSE), or partially above and below ground (UNKNOWN) - as in sloped terrain.
|
| AuDessusSol | Indication si l'étage est complètement au dessus du niveau du sol (VRAI), au dessous du niveau du sol (FAUX) ou partiellement enterré (INCONNU) comme dans le cas d'un terrain en pente.
|
| 地上判別 | この建物階が地上(TRUE)、地下(FALSE)、一部が地下部分(UNKOWN)かどうかを示すロジカル値。
|
|
SprinklerProtection |
P_SINGLEVALUE
/
IfcBoolean
|
| Sprinklerschutz | Angabe, ob des Geschoss durch eine Sprinkleranlage geschützt wird (WAHR) oder nicht (FALSCH).
|
| Sprinkler Protection | Indication whether this object is sprinkler protected (TRUE) or not (FALSE).
|
| ProtectionParSprinkler | Indication selon laquelle ce bâtimentbénéficie d'une protection par sprinkler (VRAI) ou non (FAUX)
|
| スプリンクラー防御 | スプリンクラー設備の有無を示すブーリアン値。
|
|
SprinklerProtectionAutomatic |
P_SINGLEVALUE
/
IfcBoolean
|
| Sprinklerschutz automatisch | Angabe, ob das Gebäude durch eine automatische Sprinkleranlage geschützt wird (WAHR) oder nicht (FALSCH).
|
| Sprinkler Protection Automatic | Indication whether this object has an automatic sprinkler protection (TRUE) or not (FALSE).
It should only be given, if the property "SprinklerProtection" is set to TRUE.
|
| ProtectionAutomatiqueParSprinkler | Indication selon laquelle ce bâtiment bénéficie d'une protection automatique par sprinkler (VRAI) ou non (FAUX).
|
| スプリンクラー防御自動区分 | スプリンクラー設備が自動かどうか示すブーリアン値。
|
|
LoadBearingCapacity |
P_SINGLEVALUE
/
IfcPlanarForceMeasure
|
| Deckentragfähigkeit | Maximale Deckentragfähigkeit in diesem Geschoss.
|
| Load Bearing Capacity | Maximum load bearing capacity of the floor structure throughtout the storey as designed.
|
| Capacité porteuse | Indique la force maximale pouvant être acceptée par le sol.
|
|
GrossPlannedArea |
P_SINGLEVALUE
/
IfcAreaMeasure
* |
| Gross Planned Area | Total planned gross area of the spatial structure element. Used for programming the spatial structure element.
|
| Surface programmée brute | Surface programmée brute totale de la pièce. Telle que définie lors de la programmation.
|
| 計画グロス面積 | 計画されたグロス面積。建物計画に際に使用。
|
|
NetPlannedArea |
P_SINGLEVALUE
/
IfcAreaMeasure
* |
| Net Planned Area | Total planned net area of the object. Used for programming the object.
|
| Surface programmée nette | Surface programmée nette totale de la pièce. Telle que définie lors de la programmation.
|
| 計画ネット面積 | 計画されたネット面積。建物計画に際に使用。(通常は、柱型等を抜いた面積となる)
|
|
ElevationOfSSLRelative |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Elevation of the top surface of the structural slab level given in elevation above the local zero height. If the level varies and there is no significantly more prominent elevation, then this property may be omitted. In case of any inconsistency with the geometric positioning of the top surface, the geometric representation takes precedence.
|
ElevationOfFFLRelative |
P_SINGLEVALUE
/
IfcLengthMeasure
|
Elevation of the top surface of the finished floor level given in elevation above the local zero height. If the level varies and there is no significantly more prominent elevation, then this property may be omitted. In case of any inconsistency with the geometric positioning of the top surface, the geometric representation takes precedence.
|