5.4.5.32 Pset_Tolerance

PSET_TYPEDRIVENOVERRIDE / IfcProduct,IfcTypeProduct

Properties expressing the tolerance relating to locating and shaping of an intended element or feature. Range diameters are non-negative describing a linear, rectangular or boxed region .
Properties

PSD-XML

NameTypeDescription
ToleranceDescription P_SINGLEVALUE / IfcText General description of the tolerance associated to the element or feature, its source and implications.
ToleranceBasis P_ENUMERATEDVALUE / IfcLabel / PEnum_ToleranceBasis Indication of the basis of the tolerance requirement
OverallTolerance P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range tolerance associated to the intended shape and position in XYZ.
HorizontalTolerance P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range tolerance associated to the horizontal shape and position in X, if different to the overall tolerance.
OrthogonalTolerance P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range tolerance associated to the horizontal shape and position in Y, if different to the overall tolerance.
VerticalTolerance P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range tolerance associated to the vertical shape and position in Z, if different to the overall tolerance.
PlanarFlatness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range flatness associated to the intended shape and position in XYZ.
HorizontalFlatness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range flatness associated to the horizontal surface in XY, if different to the overall flatness.
ElevationalFlatness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range flatness associated to the elevational surface in ZX, if different to the overall flatness.
SideFlatness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range flatness associated to the side surface in YZ, if different to the overall flatness.
OverallOrthogonality P_SINGLEVALUE / IfcPlaneAngleMeasure Indicative (95%-100%) range orthogonality associated to the intended shape and orientation in XYZ.
HorizontalOrthogonality P_SINGLEVALUE / IfcPlaneAngleMeasure Indicative (95%-100%) range orthogonality associated to the horizontal shape and orientation in X, if different to the overall orthogonality.
OrthogonalOrthogonality P_SINGLEVALUE / IfcPlaneAngleMeasure Indicative (95%-100%) range orthogonality associated to the horizontal shape and orientation in Y, if different to the overall orthogonality.
VerticalOrthogonality P_SINGLEVALUE / IfcPlaneAngleMeasure Indicative (95%-100%) range orthogonality associated to the vertical shape and orientation in Z, if different to the overall orthogonality.
OverallStraightness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range straightness associated to the intended shape.
HorizontalStraightness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range straightness associated to the horizontal shape in X, if different to the overall straightness.
OrthogonalStraightness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range straightness associated to the horizontal shape in Y, if different to the overall straightness.
VerticalStraightness P_SINGLEVALUE / IfcPositiveLengthMeasure Indicative (95%-100%) range straightness associated to the vertical shape in Z, if different to the overall straightness.

Link to this page  Link to this page