| Name | Type | Description |
|---|
| AccuracyClass |
P_SINGLEVALUE
/
IfcRatioMeasure
|
A designation assigned to an instrument transformer the current (or voltage) error and phase displacement of which remain within specified limits under prescribed conditions of use (IEC 321-01-24).
|
| AccuracyGrade |
P_SINGLEVALUE
/
IfcLabel
|
The grade of accuracy.
|
| RatedVoltage |
P_BOUNDEDVALUE
/
IfcElectricVoltageMeasure
|
 | Rated Voltage | The range of allowed voltage that a device is certified to handle. The upper bound of this value is the maximum.
|
|
| NominalCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Nominal Current | The nominal current that is designed to be measured.
|
|
| NominalPower |
P_SINGLEVALUE
/
IfcPowerMeasure
|
A conventional value of apparent power determining a value of the rated current that may be carried with rated voltage applied, under specified conditions. ( IEV ref 421-04-04)
|
| NumberOfPhases |
P_SINGLEVALUE
/
IfcCountMeasure
|
Number of phases that the equipment operates on.
|
| PrimaryFrequency |
P_SINGLEVALUE
/
IfcFrequencyMeasure
|
| Primary Frequency | The frequency that is going to be transformed and that runs into the transformer on the primary side.
|
 | 第１周波数 | 変圧器の1次側に伝送される周波数。
|
|
| PrimaryCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Primary Current | The current that is going to be transformed and that runs into the transformer on the primary side.
|
| 第1電流 | 変圧器の1次側に伝送される電流。
|
|
| SecondaryFrequency |
P_SINGLEVALUE
/
IfcFrequencyMeasure
|
| Secondary Frequency | The frequency that has been transformed and is running out of the transformer on the secondary side.
|
| 第2周波数 | 変圧器の2次側に出力される周波数。
|
|
| SecondaryCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Secondary Current | The current that has been transformed and is running out of the transformer on the secondary side.
|
| 第2電流 | 変圧器の2次側へ出力される電流。
|
|
PSD-XML
Link to this page