| Name | Type | Description |
|---|
| CoolingDesignAirFlow |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
 | Cooling Design Airflow | The air flowrate required during the peak cooling conditions.
|
 | 冷房設計吸気量 | ピーク時の冷房条件で要求される給気量。
|
|
| HeatingDesignAirFlow |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Heating Design Airflow | The air flowrate required during the peak heating conditions, but could also be determined by minimum ventilation requirement or minimum air change requirements.
|
|
| SensibleHeatGain |
P_SINGLEVALUE
/
IfcPowerMeasure
|
The sensible heat or energy gained by the space during the peak conditions.
|
| TotalHeatGain |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Total Heat Gain | The total (sensible+latent) amount of heat or energy gained by the space at the time of the space's peak cooling conditions.
|
| 熱取得の合計 | ピーク時の室内最大冷房負荷時に取得した顕熱或いはエネルギー。
|
|
| TotalHeatLoss |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Total Heat Loss | The total amount of heat or energy lost by the space at the time of the space's peak heating conditions.
|
| 熱ロスの合計 | ピーク時の室内最大暖房負荷時に取得・損失した熱或いはエネルギー。
|
|
| CoolingDryBulb |
P_SINGLEVALUE
/
IfcThermodynamicTemperatureMeasure
|
Dry bulb temperature, usually for for cooling design.
|
| CoolingRelativeHumidity |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Cooling Relative Humidity | Inside relative humidity for cooling design.
|
| 冷房設計相対湿度 | 冷房設計における室内設計相対湿度。
|
|
| HeatingDryBulb |
P_SINGLEVALUE
/
IfcThermodynamicTemperatureMeasure
|
Dry bulb temperature for heating design.
|
| HeatingRelativeHumidity |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Heating Relative Humidity | Inside relative humidity for heating design.
|
| 暖房設計相対湿度 | 暖房設計における室内設計相対湿度。
|
|
| VentilationDesignAirFlow |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
Ventilation outside air requirement for the space.
|
| DesignAirFlow |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
Design air flow rate for the space.
|
| CeilingRAPlenum |
P_SINGLEVALUE
/
IfcBoolean
|
| Ceiling RAPlenum | Ceiling plenum used for return air or not. TRUE = Yes, FALSE = No.
|
| 天井裏還気 | 天井裏還気（リタンあり・なし） TRUE=あり、FALSE=なし。
|
|
| BoundaryAreaHeatLoss |
P_SINGLEVALUE
/
IfcHeatFluxDensityMeasure
|
| Boundary Area Heat Loss | Heat loss per unit area for the boundary object. This is a design input value for use in the absence of calculated load data.
|
| 周辺関連設備の熱ロス | 単位面積ありた周辺関連設備の熱ロス。空調負荷計算値以外の設計設定値。
|
|
PSD-XML
Link to this page