6.2.4.25 Pset_SpaceThermalDesign

PSET_TYPEDRIVENOVERRIDE / IfcSpace

Space Thermal DesignSpace or zone HVAC design requirements. HISTORY: New property set in IFC Release 1.0 (Pset_SpaceHvacInformation); renamed to Pset_SpaceThermalDesign and revised in IFC2x2.
室内或いはゾーンの空調設計要求。履歴：IFC1.0の新PropertySet（Pset_SpaceHvacInformation)、：IFC2ｘ２にPset_SpaceThermalDesignと再定義された。
Properties

PSD-XML

NameTypeDescription
CoolingDesignAirFlow P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Cooling Design AirflowThe air flowrate required during the peak cooling conditions.
冷房設計吸気量ピーク時の冷房条件で要求される給気量。
HeatingDesignAirFlow P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Heating Design AirflowThe air flowrate required during the peak heating conditions, but could also be determined by minimum ventilation requirement or minimum air change requirements.
TotalSensibleHeatGain P_SINGLEVALUE / IfcPowerMeasure
Total Sensible Heat GainThe total sensible heat or energy gained by the space during the peak cooling conditions.
顕熱負荷の合計ピーク時の冷房条件で取得した顕熱或いはエネルギー。
TotalHeatGain P_SINGLEVALUE / IfcPowerMeasure
Total Heat GainThe total (sensible+latent) amount of heat or energy gained by the space at the time of the space's peak cooling conditions.
熱取得の合計ピーク時の室内最大冷房負荷時に取得した顕熱或いはエネルギー。
TotalHeatLoss P_SINGLEVALUE / IfcPowerMeasure
Total Heat LossThe total amount of heat or energy lost by the space at the time of the space's peak heating conditions.
熱ロスの合計ピーク時の室内最大暖房負荷時に取得・損失した熱或いはエネルギー。
CoolingDryBulb P_SINGLEVALUE / IfcThermodynamicTemperatureMeasure * Dry bulb temperature, usually for for cooling design.
CoolingRelativeHumidity P_SINGLEVALUE / IfcPositiveRatioMeasure
Cooling Relative HumidityInside relative humidity for cooling design.
冷房設計相対湿度冷房設計における室内設計相対湿度。
HeatingDryBulb P_SINGLEVALUE / IfcThermodynamicTemperatureMeasure * Dry bulb temperature for heating design.
HeatingRelativeHumidity P_SINGLEVALUE / IfcPositiveRatioMeasure
Heating Relative HumidityInside relative humidity for heating design.
暖房設計相対湿度暖房設計における室内設計相対湿度。
VentilationAirFlowrate P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Ventilation Air FlowrateVentilation outside air requirement for the space.
外気量必要外気量。
ExhaustAirFlowrate P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Exhaust Air FlowrateDesign exhaust air flow rate for the space.
排気量設計排気量。
CeilingRAPlenum P_SINGLEVALUE / IfcBoolean
Ceiling RAPlenumCeiling plenum used for return air or not. TRUE = Yes, FALSE = No.
天井裏還気天井裏還気（リタンあり・なし）　TRUE=あり、FALSE=なし。
BoundaryAreaHeatLoss P_SINGLEVALUE / IfcHeatFluxDensityMeasure
Boundary Area Heat LossHeat loss per unit area for the boundary object. This is a design input value for use in the absence of calculated load data.
周辺関連設備の熱ロス単位面積ありた周辺関連設備の熱ロス。空調負荷計算値以外の設計設定値。

Link to this page  Link to this page