| Name | Type | Description |
|---|
| Description |
P_SINGLEVALUE
/
IfcText
|
 | Description | The Description of the object.
|
 | 説明 | 鉄筋の説明。
|
|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID（例：A-1)、承認された分類に存在しないときに使用される。
|
|
| LongOutsideTopBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Long Outside Top Bar Pitch | The pitch length of the long outside top bar.
|
| 長辺・柱列帯・上端ピッチ | 長辺方向・柱列帯・上端の鉄筋間隔。
|
|
| LongInsideCenterTopBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Long Inside Center Top Bar Pitch | The pitch length of the long inside center top bar.
|
| 長辺・柱列帯・上端中央ピッチ | 長辺方向・柱間帯・上端中央の鉄筋間隔。
|
|
| LongInsideEndTopBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Long Inside End Top Bar Pitch | The pitch length of the long inside end top bar.
|
| 長辺・柱列帯・上端端部ピッチ | 長辺方向・柱間帯・上端端部の鉄筋間隔。
|
|
| ShortOutsideTopBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Short Outside Top Bar Pitch | The pitch length of the short outside top bar.
|
| 短辺・柱列帯・上端ピッチ | 短辺方向・柱列帯・上端の鉄筋間隔。
|
|
| ShortInsideCenterTopBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Short Inside Center Top Bar Pitch | The pitch length of the short inside center top bar.
|
| 短辺・柱列帯・上端中央ピッチ | 短辺方向・柱間帯・上端中央の鉄筋間隔。
|
|
| ShortInsideEndTopBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Short Inside End Top Bar Pitch | The pitch length of the short inside end top bar.
|
| 短辺・柱列帯・上端端部ピッチ | 短辺方向・柱間帯・上端端部の鉄筋間隔。
|
|
| LongOutsideLowerBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Long Outside Lower Bar Pitch | The pitch length of the long outside lower bar.
|
| 長辺・柱列帯・下端ピッチ | 長辺方向・柱列帯・下端の鉄筋間隔。
|
|
| LongInsideCenterLowerBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Long Inside Center Lower Bar Pitch | The pitch length of the long inside center lower bar.
|
| 長辺・柱列帯・下端中央ピッチ | 長辺方向・柱間帯・下端中央の鉄筋間隔。
|
|
| LongInsideEndLowerBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Long Inside End Lower Bar Pitch | The pitch length of the long inside end lower bar.
|
| 長辺・柱列帯・下端端部ピッチ | 長辺方向・柱間帯・下端端部の鉄筋間隔。
|
|
| ShortOutsideLowerBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Short Outside Lower Bar Pitch | The pitch length of the short outside lower bar.
|
| 短辺・柱列帯・下端ピッチ | 短辺方向・柱列帯・下端の鉄筋間隔。
|
|
| ShortInsideCenterLowerBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Short Inside Center Lower Bar Pitch | The pitch length of the short inside center lower bar.
|
| 短辺・柱列帯・下端中央ピッチ | 短辺方向・柱間帯・下端中央の鉄筋間隔。
|
|
| ShortInsideEndLowerBarPitch |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Short Inside End Lower Bar Pitch | The pitch length of the short inside end lower bar.
|
| 短辺・柱列帯・下端端部ピッチ | 短辺方向・柱間帯・下端端部の鉄筋間隔。
|
|
PSD-XML
Link to this page