4.1.2.3.4.2 Extruded Area Tapered Geometry

Figure 28 illustrates an instance diagram.

Extruded Area Tapered GeometryIfcExtrudedAreaSolidTaperedIfcStyledItemIfcSurfaceStyleIfcLabelIfcProfileDefIfcAxis2Placement3DIfcCartesianPointIfcDirectionIfcDirectionIfcDirectionIfcPositiveLengthMeasure

Figure 28 — Extruded Area Tapered Geometry

mvdXML Specification
<?xml version="1.0" encoding="utf-8"?>
<ConceptTemplate xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" uuid="3e7cfdff-ee51-4605-ba35-a3594f27c49c" name="Extruded Area Tapered Geometry" applicableSchema="IFC4" applicableEntity="IfcExtrudedAreaSolidTapered">
  <Rules>
    <AttributeRule RuleID="Profile" AttributeName="SweptArea">
      <EntityRules>
        <EntityRule EntityName="IfcProfileDef" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="StyledByItem">
      <EntityRules>
        <EntityRule EntityName="IfcStyledItem">
          <AttributeRules>
            <AttributeRule AttributeName="Name">
              <EntityRules>
                <EntityRule EntityName="IfcLabel" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="Styles">
              <EntityRules>
                <EntityRule EntityName="IfcSurfaceStyle" />
              </EntityRules>
            </AttributeRule>
          </AttributeRules>
        </EntityRule>
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="Position">
      <EntityRules>
        <EntityRule EntityName="IfcAxis2Placement3D">
          <AttributeRules>
            <AttributeRule AttributeName="Location">
              <EntityRules>
                <EntityRule EntityName="IfcCartesianPoint" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="Axis">
              <EntityRules>
                <EntityRule EntityName="IfcDirection" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="RefDirection">
              <EntityRules>
                <EntityRule EntityName="IfcDirection" />
              </EntityRules>
            </AttributeRule>
          </AttributeRules>
        </EntityRule>
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="ExtrudedDirection">
      <EntityRules>
        <EntityRule EntityName="IfcDirection" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="Depth">
      <EntityRules>
        <EntityRule EntityName="IfcPositiveLengthMeasure" />
      </EntityRules>
    </AttributeRule>
  </Rules>
  <SubTemplates>
    <ConceptTemplate uuid="2f62fd31-ac66-414f-87d5-4c1045060f63" name="Extruded Area Tapered Parameterized Profile" applicableSchema="IFC4" applicableEntity="IfcExtrudedAreaSolidTapered">
      <Rules>
        <AttributeRule RuleID="Profile" AttributeName="SweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcProfileDef" />
            <EntityRule EntityName="IfcParameterizedProfileDef">
              <References>
                <Template ref="7bfa1814-95e5-4fe5-afd9-83eb7a4366e1" />
              </References>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="StyledByItem">
          <EntityRules>
            <EntityRule EntityName="IfcStyledItem">
              <AttributeRules>
                <AttributeRule AttributeName="Name">
                  <EntityRules>
                    <EntityRule EntityName="IfcLabel" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Styles">
                  <EntityRules>
                    <EntityRule EntityName="IfcSurfaceStyle" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement3D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement3D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ExtrudedDirection">
          <EntityRules>
            <EntityRule EntityName="IfcDirection" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="EndSweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcParameterizedProfileDef" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="8867b942-2f8c-4eb7-9408-ed41c28dde63" name="Extruded Area Tapered PolyCurve Profile" applicableSchema="IFC4" applicableEntity="IfcExtrudedAreaSolidTapered">
      <Rules>
        <AttributeRule RuleID="Profile" AttributeName="SweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcProfileDef">
              <References>
                <Template ref="d3b8661b-e65b-4077-adc7-c6742d219691" />
              </References>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="StyledByItem">
          <EntityRules>
            <EntityRule EntityName="IfcStyledItem">
              <AttributeRules>
                <AttributeRule AttributeName="Name">
                  <EntityRules>
                    <EntityRule EntityName="IfcLabel" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Styles">
                  <EntityRules>
                    <EntityRule EntityName="IfcSurfaceStyle" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="EndSweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcDerivedProfileDef">
              <References>
                <Template ref="3167ade4-0219-4ec8-861f-b9e19fe6c962" />
              </References>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement3D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement3D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ExtrudedDirection">
          <EntityRules>
            <EntityRule EntityName="IfcDirection" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
  </SubTemplates>
</ConceptTemplate>

Link to this page  Link to this page