4.1.2.3.4.4 Revolved Area Geometry

Figure 33 illustrates an instance diagram.

Revolved Area GeometryIfcRevolvedAreaSolidIfcStyledItemIfcSurfaceStyleIfcLabelIfcStyledItemIfcProfileDefIfcAxis2Placement3DIfcCartesianPointIfcDirectionIfcDirectionIfcAxis1PlacementIfcPlaneAngleMeasure

Figure 33 — Revolved Area Geometry

mvdXML Specification
<?xml version="1.0" encoding="utf-8"?>
<ConceptTemplate xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" uuid="c1529bd2-e85a-4748-bc9f-98ba0a730c35" name="Revolved Area Geometry" applicableSchema="IFC4" applicableEntity="IfcRevolvedAreaSolid">
  <Rules>
    <AttributeRule AttributeName="Position">
      <EntityRules>
        <EntityRule EntityName="IfcAxis2Placement3D">
          <AttributeRules>
            <AttributeRule AttributeName="Location">
              <EntityRules>
                <EntityRule EntityName="IfcCartesianPoint" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="Axis">
              <EntityRules>
                <EntityRule EntityName="IfcDirection" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="RefDirection">
              <EntityRules>
                <EntityRule EntityName="IfcDirection" />
              </EntityRules>
            </AttributeRule>
          </AttributeRules>
        </EntityRule>
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="Axis">
      <EntityRules>
        <EntityRule EntityName="IfcAxis1Placement" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="Angle">
      <EntityRules>
        <EntityRule EntityName="IfcPlaneAngleMeasure" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule RuleID="Profile" AttributeName="SweptArea">
      <EntityRules>
        <EntityRule EntityName="IfcProfileDef" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="StyledByItem">
      <EntityRules>
        <EntityRule EntityName="IfcStyledItem">
          <AttributeRules>
            <AttributeRule AttributeName="Styles">
              <EntityRules>
                <EntityRule EntityName="IfcSurfaceStyle" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="Name">
              <EntityRules>
                <EntityRule EntityName="IfcLabel" />
              </EntityRules>
            </AttributeRule>
          </AttributeRules>
        </EntityRule>
        <EntityRule EntityName="IfcStyledItem" />
      </EntityRules>
    </AttributeRule>
  </Rules>
  <SubTemplates>
    <ConceptTemplate uuid="11a2522e-3098-47dc-9aec-67943ce3d893" name="Revolved Area Basic Profile" applicableSchema="IFC4" applicableEntity="IfcRevolvedAreaSolid">
      <Rules>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement3D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Axis">
          <EntityRules>
            <EntityRule EntityName="IfcAxis1Placement" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Angle">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule RuleID="Profile" AttributeName="SweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcProfileDef">
              <References>
                <Template ref="7bfa1814-95e5-4fe5-afd9-83eb7a4366e1" />
              </References>
            </EntityRule>
            <EntityRule EntityName="IfcProfileDef" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="StyledByItem">
          <EntityRules>
            <EntityRule EntityName="IfcStyledItem">
              <AttributeRules>
                <AttributeRule AttributeName="Styles">
                  <EntityRules>
                    <EntityRule EntityName="IfcSurfaceStyle" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Name">
                  <EntityRules>
                    <EntityRule EntityName="IfcLabel" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcStyledItem" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="fe1bf350-9c01-4905-8842-5b35ad8e24e4" name="Revolved Area CompositeCurve Profile" applicableSchema="IFC4" applicableEntity="IfcRevolvedAreaSolid">
      <Rules>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement3D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Axis">
          <EntityRules>
            <EntityRule EntityName="IfcAxis1Placement">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Angle">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule RuleID="Profile" AttributeName="SweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcArbitraryProfileDefWithVoids">
              <References>
                <Template ref="63832052-221d-4c41-95d4-a56ee5d69e88" />
              </References>
            </EntityRule>
            <EntityRule EntityName="IfcProfileDef" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="StyledByItem">
          <EntityRules>
            <EntityRule EntityName="IfcStyledItem">
              <AttributeRules>
                <AttributeRule AttributeName="Styles">
                  <EntityRules>
                    <EntityRule EntityName="IfcSurfaceStyle" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Name">
                  <EntityRules>
                    <EntityRule EntityName="IfcLabel" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcStyledItem" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="38ca694b-42e0-47ed-b529-e5184a65c04c" name="Revolved Area PolyCurve Profile" applicableSchema="IFC4" applicableEntity="IfcRevolvedAreaSolid">
      <Rules>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement3D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Axis">
          <EntityRules>
            <EntityRule EntityName="IfcAxis1Placement">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Angle">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule RuleID="Profile" AttributeName="SweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcArbitraryProfileDefWithVoids">
              <References>
                <Template ref="d3b8661b-e65b-4077-adc7-c6742d219691" />
              </References>
            </EntityRule>
            <EntityRule EntityName="IfcProfileDef" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="StyledByItem">
          <EntityRules>
            <EntityRule EntityName="IfcStyledItem">
              <AttributeRules>
                <AttributeRule AttributeName="Styles">
                  <EntityRules>
                    <EntityRule EntityName="IfcSurfaceStyle" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Name">
                  <EntityRules>
                    <EntityRule EntityName="IfcLabel" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcStyledItem" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="ea1b17db-5e78-44b2-b6b3-b2918f750f0d" name="Revolved Area Standardized Profile" applicableSchema="IFC4" applicableEntity="IfcRevolvedAreaSolid">
      <Rules>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement3D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Axis">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Axis">
          <EntityRules>
            <EntityRule EntityName="IfcAxis1Placement" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Angle">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule RuleID="Profile" AttributeName="SweptArea">
          <EntityRules>
            <EntityRule EntityName="IfcProfileDef">
              <References>
                <Template ref="cb6ab841-6d4f-4a4c-81e8-3cc15d415ddc" />
              </References>
            </EntityRule>
            <EntityRule EntityName="IfcProfileDef" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="StyledByItem">
          <EntityRules>
            <EntityRule EntityName="IfcStyledItem">
              <AttributeRules>
                <AttributeRule AttributeName="Styles">
                  <EntityRules>
                    <EntityRule EntityName="IfcSurfaceStyle" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="Name">
                  <EntityRules>
                    <EntityRule EntityName="IfcLabel" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcStyledItem" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
  </SubTemplates>
</ConceptTemplate>

Link to this page  Link to this page