| Name | Description |
|---|
| INSITU |
The concrete mixture is cast into formwork on site.
|
| MIXED |
A combination of casting methods are used.
|
| PRECAST |
The concrete mixture is cast into typically a reusable mold or form that is cured in a controlled environment.
|
| PRINTED |
Concrete extruded into the designed form, either on-site or off-site.
|
| SPRAYED_DRY |
A blend of cement and sand, without additional water. The water is added directly at the end of the lance to create the concrete spray. This dry-mix method meets certain spray distance restrictions. Dry-mix offers greater spraying distances than wet-mix. In certain cases, this method also helps manage the concrete preparation and deployment times.
|
| SPRAYED_WET |
The concrete mix is watered and machine-mixed then pumped through a pipe to the application nozzle.
|
| SLIPFORMED |
The slipform helps to conduct continuous pouring of the concrete to the moving formwork.
|
| OTHER |
 | (other) | Value is not listed.
|
|
| NOTKNOWN |
| (unknown) | Value is unknown.
|
|
| UNSET |
| (unset) | Value has not been specified.
|
|
References: Pset_ConcreteElementGeneral
Link to this page