Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
NominalSupplyVoltage |
P_SINGLEVALUE
/
IfcElectricVoltageMeasure
|
| Nominal Supply Voltage | The nominal voltage of the supply.
|
| 公称電圧 | 電源の公称電圧。
|
|
NominalSupplyVoltageOffset |
P_BOUNDEDVALUE
/
IfcElectricVoltageMeasure
|
| Nominal Supply Voltage Offset | The maximum and minimum allowed voltage of the supply e.g. boundaries of 380V/440V may be applied for a nominal voltage of 400V.
|
| オフセット公称電圧 | 電源の最大値と最小許容電圧。たとえば380V/440Vの境界は400Vの公称電圧に適用される。
|
|
NominalFrequency |
P_SINGLEVALUE
/
IfcFrequencyMeasure
|
| Nominal Frequency | The nominal frequency of the supply.
|
| 公称周波数 | 電源の公称周波数。
|
|
ConnectedConductorFunction |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ConductorFunctionEnum |
| Connected Conductor Function | Function of the conductors to which the load is connected.
|
| 接続導体機能 | 導体の機能は負荷が接続された状態。
|
|
ShortCircuit3PoleMaximumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit3 Pole Maximum State | Maximum 3 pole short circuit current provided at the point of supply.
|
| 3極最大短絡電流 | 電源供給時点の3極最大短絡電流。
|
|
ShortCircuit3PolePowerFactorMaximumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit3 Pole Power Factor Maximum State | Power factor of the maximum 3 pole short circuit current provided at the point of supply.
|
| 3極最大短絡電流力率 | 電源供給時点の3極最大短絡電流力率。
|
|
ShortCircuit2PoleMinimumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit2 Pole Minimum State | Minimum 2 pole short circuit current provided at the point of supply.
|
| 2極最小短絡電流 | 電源供給時点の2極最小短絡電流。
|
|
ShortCircuit2PolePowerFactorMinimumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit2 Pole Power Factor Minimum State | Power factor of the minimum 2 pole short circuit current provided at the point of supply.
|
| 2極最小短絡電流力率 | 電源供給時点の2極最小短絡電流力率。
|
|
ShortCircuit1PoleMaximumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit1 Pole Maximum State | Maximum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N.
|
| 1極最大短絡電流 | 電源供給時点の点1相とN間の1極最大短絡電流。
|
|
ShortCircuit1PolePowerFactorMaximumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit1 Pole Power Factor Maximum State | Power factor of the maximum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N.
|
| 1極最大短絡電流力率 | 電源供給時点の点1相とN間の1極最大短絡電流力率。
|
|
ShortCircuit1PoleMinimumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit1 Pole Minimum State | Minimum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N.
|
| 1極最小短絡電流 | 電源供給時点の点1相とN間の1極最小短絡電流。
|
|
ShortCircuit1PolePowerFactorMinimumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit1 Pole Power Factor Minimum State | Power factor of the minimum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N.
|
| 1極最小短絡電流力率 | 電源供給時点の点1相とN間の1極最小短絡電流力率。
|
|
EarthFault1PoleMaximumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Earth Fault1 Pole Maximum State | Maximum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN.
|
| 1極最大地絡電流 | 電源供給時点の点1相とPE/PEN間の1極最大地絡電流。
|
|
EarthFault1PolePowerFactorMaximumState |
P_SINGLEVALUE
/
IfcReal
|
| Earth Fault1 Pole Power Factor Maximum State | Power factor of the maximum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN.
|
| 1極最大地絡電流力率 | 電源供給時点の点1相とPE/PEN間の1極最大地絡電流力率。
|
|
EarthFault1PoleMinimumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Earth Fault1 Pole Minimum State | Minimum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN.
|
| 1極最小地絡電流 | 電源供給時点の点1相とPE/PEN間の1極最小地絡電流。
|
|
EarthFault1PolePowerFactorMinimumState |
P_SINGLEVALUE
/
IfcReal
|
| Earth Fault1 Pole Power Factor Minimum State | Power factor of the minimum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN.
|
| 1極最小地絡電流力率 | 電源供給時点の点1相とPE/PEN間の1極最小地絡電流力率。
|
|
MaximumInsulatedVoltage |
P_SINGLEVALUE
/
IfcElectricVoltageMeasure
|
The max voltage that the insulation would operate normally
|
RatedCapacitance |
P_SINGLEVALUE
/
IfcElectricCapacitanceMeasure
|
Capacitance value determined under specified conditions and declared by the manufacturer.
|
PowerCapacity |
P_SINGLEVALUE
/
IfcElectricChargeMeasure
|
Power capacity of the equipment
|
NumberOfPhases |
P_SINGLEVALUE
/
IfcCountMeasure
|
Number of phases that the equipment operates on.
|