 | Oberfläche - Entlang einer Achse rotiert |
 | Surface Of Revolution |
 | Surface de révolution |
| Item | SPF | XML | Change | Description | IFC2x3 to IFC4 4.0.0.0 |
|---|---|---|---|---|
| IfcSurfaceOfRevolution | ||||
| Position | MODIFIED | Instantiation changed to OPTIONAL. |
The IfcSurfaceOfRevolution is a surface derived by rotating a curve about an axis.
NOTE Definition according to ISO/CD 10303-42:1992
A surface of revolution is the surface obtained by rotating a curve one complete revolution about an axis. The data shall be interpreted as below.The parameterization is as follows where the curve has a parameterization λ(u):
C = AxisPosition.Location
V = AxisPosition.Z
In order to produce a single-valued surface with a complete revolution, the curve shall be such that when expressed in a cylindrical coordinate system (r,φ ,z) centred at C with an axis V, no two distinct parametric points on the curve shall have the same values for (r, z). For a surface of revolution the parametric range is 0 < u < 360 degree. The parameterization range for v is defined by referenced curve.
NOTE Entity adapted from surface_of_revolution defined in ISO 10303-42.
HISTORY New entity in IFC2x.
Informal Propositions:
| # | Attribute | Type | Cardinality | Description | G |
|---|---|---|---|---|---|
| 3 | AxisPosition | IfcAxis1Placement | A point on the axis of revolution and the direction of the axis of revolution. | X | |
| AxisLine :=IfcRepresentationItem() || IfcGeometricRepresentationItem () || IfcCurve() || IfcLine(AxisPosition.Location, IfcRepresentationItem() || IfcGeometricRepresentationItem () || IfcVector(AxisPosition.Z,1.0)) | IfcLine | The line coinciding with the axis of revolution. | X |
| # | Attribute | Type | Cardinality | Description | G |
|---|---|---|---|---|---|
| IfcRepresentationItem | |||||
| LayerAssignment | IfcPresentationLayerAssignment @AssignedItems | S[0:1] | Assignment of the representation item to a single or multiple layer(s). The LayerAssignments can override a LayerAssignments of the IfcRepresentation it is used within the list of Items.
IFC2x3 CHANGE The inverse attribute LayerAssignments has been added. IFC4 CHANGE The inverse attribute LayerAssignment has been restricted to max 1. Upward compatibility for file based exchange is guaranteed. | X | |
| StyledByItem | IfcStyledItem @Item | S[0:1] | Reference to the IfcStyledItem that provides presentation information to the representation, e.g. a curve style, including colour and thickness to a geometric curve.
IFC2x3 CHANGE The inverse attribute StyledByItem has been added. | X | |
| IfcGeometricRepresentationItem | |||||
| IfcSurface | |||||
| Dim :=3 | IfcDimensionCount | The space dimensionality of IfcSurface. It is always a three-dimensional geometric representation item.
IFC4 CHANGE Derived attribute promoted from subtypes. |
X | ||
| IfcSweptSurface | |||||
| 1 | SweptCurve | IfcProfileDef | The curve to be swept in defining the surface. The curve is defined as a profile within the position coordinate system. | X | |
| 2 | Position | IfcAxis2Placement3D | ? |
Position coordinate system for the swept surface, provided by a profile definition within the XY plane of the Position coordinates. If not provided, the position of the profile being swept is determined by the object coordinate system. In this case, the swept surface is not repositioned.
IFC4 CHANGE The attribute has been changed to OPTIONAL with upward compatibility for file-based exchange. | X |
| IfcSurfaceOfRevolution | |||||
| 3 | AxisPosition | IfcAxis1Placement | A point on the axis of revolution and the direction of the axis of revolution. | X | |
| AxisLine :=IfcRepresentationItem() || IfcGeometricRepresentationItem () || IfcCurve() || IfcLine(AxisPosition.Location, IfcRepresentationItem() || IfcGeometricRepresentationItem () || IfcVector(AxisPosition.Z,1.0)) | IfcLine | The line coinciding with the axis of revolution. | X | ||
<xs:element name="IfcSurfaceOfRevolution" type="ifc:IfcSurfaceOfRevolution" substitutionGroup="ifc:IfcSweptSurface" nillable="true"/>
<xs:complexType name="IfcSurfaceOfRevolution">
<xs:complexContent>
<xs:extension base="ifc:IfcSweptSurface">
<xs:sequence>
<xs:element name="AxisPosition" type="ifc:IfcAxis1Placement" nillable="true"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
ENTITY IfcSurfaceOfRevolution
SUBTYPE OF (IfcSweptSurface);
AxisPosition : IfcAxis1Placement;
DERIVE
AxisLine : IfcLine := IfcRepresentationItem() || IfcGeometricRepresentationItem () || IfcCurve() || IfcLine(AxisPosition.Location,
IfcRepresentationItem() || IfcGeometricRepresentationItem () || IfcVector(AxisPosition.Z,1.0));
END_ENTITY;
EXPRESS-G diagram
Link to this page