Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| Etat | Etat de l'élément, utilisé avant tout pour les projets de rénovation et réaménagement. L'état assigné peut être "Nouveau" - l'élément prévu pour du neuf, "Existant" - l'élément existait et est maintenu, "Démoli" - l'élément existait mais doit être démoli/supprimé, "Provisoire" - l'élément existera à titre provisoire seulement (comme un support structurel par exemple).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
PowerSource |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_CompressorTypePowerSource |
| Power Source | Type of power driving the compressor.
|
| SourcePuissance | Type de puissance fournie au compresseur
|
|
RefrigerantClass |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_RefrigerantClass |
| Refrigerant Class | Refrigerant class used by the object.
CFC: Chlorofluorocarbons.
HCFC: Hydrochlorofluorocarbons.
HFC: Hydrofluorocarbons.
|
| ClasseRéfrigérant | Classe de réfrigérant utilisé par le compresseur.
CFC
HCFC
HFC
|
|
MinimumPartLoadRatio |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Minimum Part Load Ratio | Minimum part load ratio as a fraction of nominal capacity.
|
| CoefficientMinimalChargePartielle | Coefficient minimum de charge partielle en tant que fraction de la puissance nominale.
|
|
MaximumPartLoadRatio |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Maximum Part Load Ratio | Maximum part load ratio as a fraction of nominal capacity.
|
| CoefficientMaximalChargePartielle | Coefficient maximal de charge partielle en tant que fraction de la puissance nominale.
|
|
CompressorSpeed |
P_SINGLEVALUE
/
IfcRotationalFrequencyMeasure
|
| Compressor Speed | Compressor speed.
|
| VitesseCompresseur | Vitesse du compresseur
|
|
NominalCapacity |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Nominal Capacity | The total nominal or volumetric capacity of the object.
Compressor nameplate capacity.
|
| PuissanceCompresseur | Puissance du compresseur au niveau de sa plaque.
|
|
IdealCapacity |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Ideal Capacity | Compressor capacity under ideal conditions.
|
| PuissanceMaximale | Puissance maximale sous des conditions idéales
|
|
IdealShaftPower |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Ideal Shaft Power | Compressor shaft power under ideal conditions.
|
| PuissanceArbreMaximale | Puissance au niveau de l'arbre du compresseur sous conditions idéales.
|
|
HasHotGasBypass |
P_SINGLEVALUE
/
IfcBoolean
|
| Has Hot Gas Bypass | Whether or not hot gas bypass is provided for the compressor. TRUE = Yes, FALSE = No.
|
| PossedeBypassGazChaud | Qu'il y ait ou non un bypass du gaz chaud fourni au niveau du compresseur, VRAI= oui, FAUX= Non.
|
|
ImpellerDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Impeller Diameter | Diameter of object - used to scale performance of geometrically similar objects.
|
| DiametreRotor | Diamètre du rotor du compresseur - utilisé pour dimensionner les performances des compresseurs géométriquement similaires.
|
|