Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
MotorDriveType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_FanMotorConnectionType |
| Motor Drive Type | Motor drive type:
DIRECTDRIVE: Direct drive.
BELTDRIVE: Belt drive.
COUPLING: Coupling.
OTHER: Other type of motor drive.
UNKNOWN: Unknown motor drive type.
|
| モーター駆動種類 | モーター駆動種類
DIRECTDRIVE: ダイレクトドライブ
BELTDRIVE: ベルトドライブ
COUPLING: カップリング
OTHER: その他
|
|
CapacityControlType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_FanCapacityControlType |
| Capacity Control Type | InletVane: Control by adjusting inlet vane.
VariableSpeedDrive: Control by variable speed drive.
BladePitchAngle: Control by adjusting blade pitch angle.
TwoSpeed: Control by switch between high and low speed.
DischargeDamper: Control by modulating discharge damper.
|
| 容量制御方式 | InletVane: インレットベーン
VariableSpeedDrive: 変速駆動
BladePitchAngle: 羽根ピッチ制御
TwoSpeed: 二速制御
DischargeDamper: 吐出ダンパ制御
|
|
OperationTemperatureRange |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Operation Temperature Range | Allowable operation ambient air temperature range.
|
| 動作温度範囲 | 許容動作周囲温度範囲
|
|
NominalAirFlowRate |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Nominal Air Flow Rate | Nominal air flow rate.
|
| 設計風量 | 設計風量
|
|
NominalTotalPressure |
P_SINGLEVALUE
/
IfcPressureMeasure
|
| Nominal Total Pressure | Nominal total pressure rise across the fan.
|
| 設計全圧 | ファンでの設計全圧上昇
|
|
NominalStaticPressure |
P_SINGLEVALUE
/
IfcPressureMeasure
|
| Nominal Static Pressure | The static pressure within the air stream that the fan must overcome to insure designed circulation of air.
|
| 設計静圧 | 設計空気循環量を保証するためにファンが克服しなければならない気流中の静圧
|
|
NominalRotationSpeed |
P_SINGLEVALUE
/
IfcRotationalFrequencyMeasure
|
| Nominal Rotation Speed | Rotational speed of the object under nominal conditions.
Nominal fan wheel speed.
|
| 設計回転速度 | 設計ホイール速度
|
|
NominalPowerRate |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Nominal Power Rate | Nominal fan power rate.
|
| 設計動力 | 設計動力
|
|
OperationalCriteria |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Operational Criteria | Time of operation at maximum operational ambient air temperature.
|
| 動作環境 | 最大動作周囲温度での動作の時間
|
|
PressureCurve |
P_TABLEVALUE
/
IfcVolumetricFlowRateMeasure
/
IfcPressureMeasure
|
| Pressure Curve | Pressure rise = f (flow rate).
|
|
EfficiencyCurve |
P_TABLEVALUE
/
IfcVolumetricFlowRateMeasure
/
IfcNormalisedRatioMeasure
|
| Efficiency Curve | Fan efficiency =f (flow rate).
|
|
EfficiencyPoint |
P_SINGLEVALUE
/
IfcNormalisedRatioMeasure
|
The point at which the fan operates, e.g. 0.5.
|
StaticLoad |
P_SINGLEVALUE
/
IfcForceMeasure
|
The static load on the shell construction when the fan is in operation.
|
DynamicLoad |
P_SINGLEVALUE
/
IfcForceMeasure
|
The dynamic load on the shell construction when the fan is in operation.
|