Name | Type | Description |
Reference |
P_SINGLEVALUE
/
IfcIdentifier
|
| Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
|
| 参照 | 当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
|
|
Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
|
| 状態 | 要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
|
|
VibrationTransmissibility |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Vibration Transmissibility | The vibration transmissibility percentage.
|
| 振動伝達 | 振動伝達割合
|
|
IsolatorStaticDeflection |
P_SINGLEVALUE
/
IfcLengthMeasure
|
| Isolator Static Deflection | Static deflection of the vibration isolator.
|
| 振動絶縁材静的たわみ | 振動絶縁材の静的たわみ
|
|
IsolatorCompressibility |
P_SINGLEVALUE
/
IfcRatioMeasure
|
| Isolator Compressibility | The compressibility of the vibration isolator.
|
| 振動絶縁材の圧縮率 | 振動絶縁材の圧縮率の圧縮率
|
|
MaximumSupportedWeight |
P_SINGLEVALUE
/
IfcMassMeasure
|
| Maximum Supported Weight | The maximum weight that can be carried by the vibration isolator.
|
| 最高支持重量 | 振動絶縁材で支えられる最高重量
|
|
NominalHeight |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Height | The nominal height of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
Height of the vibration isolator before the application of load.
|
| 高さ | 負荷を掛ける前の振動絶縁材の高さ
|
|