8.10.5.14 Pset_MaterialWater

PSET_MATERIALDRIVEN / IfcMaterial

Material WaterA set of extended material properties for of water typically used within the context of building services and flow distribution systems.
Change log
ItemSPFXMLChangeDescription
IFC4X3_ADD2 to IFC4X4_draft
    Pset_MaterialWater
      ElectricalConductivityADDED
      TemperatureADDED
      Cl-ADDED
      NO3-ADDED
      SO42-ADDED
      HCO3-ADDED
      Na+ADDED
      K+ADDED
      Mg2+ADDED
      Ca2+ADDED
Properties

PSD-XML

NameTypeDescription
IsPotable P_SINGLEVALUE / IfcBoolean
Is PotableIf TRUE, then the water is considered potable.
Hardness P_SINGLEVALUE / IfcIonConcentrationMeasure
HardnessWater hardness as positive, multivalent ion concentration in the water (usually concentrations of calcium and magnesium ions in terms of calcium carbonate).
AlkalinityConcentration P_SINGLEVALUE / IfcIonConcentrationMeasure
Alkalinity ConcentrationMaximum alkalinity concentration (maximum sum of concentrations of each of the negative ions substances measured as CaCO3).
AcidityConcentration P_SINGLEVALUE / IfcIonConcentrationMeasure
Acidity ConcentrationMaximum CaCO3 equivalent that would neutralize the acid.
ImpuritiesContent P_SINGLEVALUE / IfcNormalisedRatioMeasure
Impurities ContentFraction of impurities such as dust to the total amount of water. This is measured in weight of impurities per weight of water and is therefore unitless.
DissolvedSolidsContent P_SINGLEVALUE / IfcNormalisedRatioMeasure
Dissolved Solids ContentFraction of the dissolved solids to the total amount of water. This is measured in weight of dissolved solids per weight of water and is therefore unitless.
PHLevel P_SINGLEVALUE / IfcPHMeasure
PHLevelMaximum water PH in a range from 0-14.
ElectricalConductivity P_SINGLEVALUE / IfcElectricConductanceMeasure Electrical conductivity. Measured under specified conditions, between the opposite faces of a unit cube of defined dimensions of an aqueous solution. For water quality examination, this is often expressed as "electrical conductivity" and may be used as a measure of the concentration of ionizable solutes present in the sample.
Temperature P_REFERENCEVALUE / IfcTimeSeries / IfcThermodynamicTemperatureMeasure
TemperatureTemperature of the fluid. Indicates the current measured temperature.
Cl- P_SINGLEVALUE / IfcReal Content of Cl- in the water sample.
NO3- P_SINGLEVALUE / IfcReal Content of NO3- in the water sample.
SO42- P_SINGLEVALUE / IfcReal Content of SO4 2- in the water sample.
HCO3- P_SINGLEVALUE / IfcReal Content of HCO3- in the water sample.
Na+ P_SINGLEVALUE / IfcReal Content of Na+ in the water sample.
K+ P_SINGLEVALUE / IfcReal Content of K+ in the water sample.
Mg2+ P_SINGLEVALUE / IfcReal Content of Mg2+ in the water sample.
Ca2+ P_SINGLEVALUE / IfcReal Content of Ca2+ in the water sample.

Link to this page  Link to this page