8.10.5.24 Pset_MechanicalPanelOutOfPlaneNegative

PSET_MATERIALDRIVEN / IfcMaterial

Properties

PSD-XML

Name	Type	Description
YoungModulusBending	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcModulusOfElasticityMeasure	Defining values: α; defined values: elastic modulus in bending.
YoungModulusTension	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcModulusOfElasticityMeasure	Defining values: α; defined values: elastic modulus in tension.
YoungModulusCompression	P_SINGLEVALUE / IfcModulusOfElasticityMeasure	Elastic modulus in compression.
ShearModulus	P_SINGLEVALUE / IfcModulusOfElasticityMeasure	Shear Modulus A measure of the shear modulus of elasticity of the material.
BendingStrength	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcPressureMeasure	Bending strength. Defining values: α; defined values: bending strength.
CompressiveStrength	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcPressureMeasure	The compressive strength of the object or material. Defining values: α; defined values: compressive strength.
TensileStrength	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcPressureMeasure	Indicates the ability to withstand breakage apart under applied force.
ShearStrength	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcPressureMeasure	Defining values: α; defined values: shear strength.
BearingStrength	P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcPressureMeasure	Defining values: α; defined values: bearing strength of bolt holes, i.e. intrados pressure.
RaisedCompressiveStrength	P_SINGLEVALUE / IfcPressureMeasure	Alternative value for compressive strength which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.
ReferenceDepth	P_SINGLEVALUE / IfcPositiveLengthMeasure	Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.

  Link to this page