7.6.4.10 Pset_SanitaryTerminalTypeCommon

PSET_TYPEDRIVENOVERRIDE / IfcSanitaryTerminal

Sanitary Terminal Type CommonCommon properties for sanitary terminals.
衛生器具の共通プロパティを設定。
Change log
ItemSPFXMLChangeDescription
IFC4 Addendum 2 4.0.2.0
    Pset_SanitaryTerminalTypeCommon
      StatusADDED
      NominalLengthADDED
      NominalWidthADDED
      NominalDepthADDED
      ColorADDED
Properties

PSD-XML

NameTypeDescription
Reference P_SINGLEVALUE / IfcIdentifier
ReferenceReference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.
IFC4.3.0.0 DEPRECATION  The Reference property is deprecated and shall no longer be used, use attribute Name on the relating type instead.
参照当該プロジェクトで定義する形式の参照ID(例:A-1)、承認された分類に存在しないときに使用される。
Status P_ENUMERATEDVALUE / IfcLabel / PEnum_ElementStatus Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
NominalLength P_SINGLEVALUE / IfcNonNegativeLengthMeasure The nominal overall length of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
NominalWidth P_SINGLEVALUE / IfcNonNegativeLengthMeasure
Nominal WidthThe nominal overall width of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
公称幅呼び幅寸法。
NominalDepth P_SINGLEVALUE / IfcNonNegativeLengthMeasure
Nominal DepthNominal Depth of the object
深さ装置の基礎に配管吸入口から測定した深さ。
Colour P_SINGLEVALUE / IfcLabel Colour of this object.

Link to this page  Link to this page