7.7.4.6 Pset_FenderDesignCriteria

PSET_TYPEDRIVENOVERRIDE / IfcSpace / BERTH

Properties common to the definition of design criteria of all occurrences of IfcImpactProtectionDevice and types of IfcImpactProtectionDeviceType with the predefined type set to FENDER.
Change log
ItemSPFXMLChangeDescription
IFC4x3_RC3 to IFC4x3_RC4
    Pset_FenderDesignCriteriaMOVEDSchema changed from IFCPORTSANDWATERWAYS to IFCPORTSANDWATERWAYSDOMAIN.
Properties

PSD-XML

NameTypeDescription
CoefficientOfFriction P_SINGLEVALUE / IfcPositiveRatioMeasure Coefficient of friction value for the fender
EnergyAbsorptionTolerance P_SINGLEVALUE / IfcPositiveRatioMeasure Manufacturing tolerance on energy absorption
MaxReactionTolerance P_SINGLEVALUE / IfcPositiveRatioMeasure Manufacturing tolerance on maximum reaction at fender support.
MaximumTemperatureFactor P_SINGLEVALUE / IfcPositiveRatioMeasure Deviation in performance due to maximum design temperature
MinimumTemperatureFactor P_SINGLEVALUE / IfcPositiveRatioMeasure Deviation in performance due to minimum design temperature
VelocityFactorEnergy P_SINGLEVALUE / IfcPositiveRatioMeasure Deviation in energy absorption performance due to strain rate
VelocityFactorReaction P_SINGLEVALUE / IfcPositiveRatioMeasure Deviation in reaction due to strain rate
EnergyAbsorption P_SINGLEVALUE / IfcEnergyMeasure Energy absorption capacity of the element.
MaxReaction P_SINGLEVALUE / IfcForceMeasure Maximum reaction from the element
MinCompressedFenderHeight P_SINGLEVALUE / IfcPositiveLengthMeasure Minimum height required for a compressed fender to prevent vessels striking the structure
AddedMassCoefficientMethod P_ENUMERATEDVALUE / IfcLabel / PEnum_AddedMassCoefficientMethod Method used to determine the Added Mass Coefficient used for design

Link to this page  Link to this page