7.7.4.24 Pset_VesselLineCommon

PSET_TYPEDRIVENOVERRIDE / IfcMechanicalFastener / ROPE,IfcMechanicalFastenerType / ROPE

Properties for vessel lines and anchoring
Change log
ItemSPFXMLChangeDescription
IFC4x3_RC3 to IFC4x3_RC4
    Pset_VesselLineCommonMOVEDSchema changed from IFCPORTSANDWATERWAYS to IFCPORTSANDWATERWAYSDOMAIN.
Properties

PSD-XML

NameTypeDescription
LineIdentifier P_SINGLEVALUE / IfcIdentifier Reference ID relative to a design vessel in the project
MidshipToFairLead P_SINGLEVALUE / IfcLengthMeasure Distance from the vessel midship to the fairlead for the line
CentreLineToFairlead P_SINGLEVALUE / IfcLengthMeasure Distance from the vessel centreline to the fairlead for the line
HeightAboveMainDeck P_SINGLEVALUE / IfcLengthMeasure Height of the fairlead above the main deck of the vessel
FairleadToTermination P_SINGLEVALUE / IfcLengthMeasure Distance from the fairlead to the bitt or winch on the vessel where the line terminates
WinchBreakLimit P_SINGLEVALUE / IfcForceMeasure Line force at which the winch starts to release the line (maximum load)
PreTensionAim P_SINGLEVALUE / IfcForceMeasure Line force that the winch is set to maintain (minimum load)
LineType P_SINGLEVALUE / IfcLabel Mooring line type
LineStrength P_SINGLEVALUE / IfcForceMeasure Breaking load of the line (note that ultimate stress is not part of any of the material Psets)
TailLength P_SINGLEVALUE / IfcPositiveLengthMeasure Length of the tail
TailDiameter P_SINGLEVALUE / IfcPositiveLengthMeasure Diameter of the tail
TailType P_SINGLEVALUE / IfcLabel Mooring tail type
TailStrength P_SINGLEVALUE / IfcForceMeasure Breaking load of the tail (note that ultimate stress is not part of any of the material Psets)

Link to this page  Link to this page