 | Kreisprofil - parametrische Definition |
 | Circle Profile Def |
 | Définition de profil circulaire |
| Item | SPF | XML | Change | Description | IFC2x3 to IFC4 4.0.0.0 |
|---|---|---|---|---|
| IfcCircleProfileDef | ||||
| Position | MODIFIED | Instantiation changed to OPTIONAL. |
IfcCircleProfileDef defines a circle as the profile definition used by the swept surface geometry or by the swept area solid. It is given by its Radius attribute and placed within the 2D position coordinate system, established by the Position attribute.
HISTORY New entity in IFC1.5.
Figure 565 illustrates parameters for the circle profile definition. The parameterized profile defines its own position coordinate system. The underlying coordinate system is defined by the swept surface or swept area solid that uses the profile definition. It is the xy plane of either:
Or in case of sectioned spines, it is the xy plane of each list member of IfcSectionedSpine.CrossSectionPositions. By using offsets of the position location, the parameterized profile can be positioned centric (using x,y offsets = 0.), or at any position relative to the profile. Explicit coordinate offsets are used to define cardinal points (e.g. upper-left bound). The Position attribute defines the 2D position coordinate system of the circle.
The Radius attribute defines the radius of the circle.
 |
Figure 565 — Circle profile |
| # | Attribute | Type | Cardinality | Description | G |
|---|---|---|---|---|---|
| 4 | Radius | IfcPositiveLengthMeasure | The radius of the circle. | X |
| # | Attribute | Type | Cardinality | Description | G |
|---|---|---|---|---|---|
| IfcProfileDef | |||||
| 1 | ProfileType | IfcProfileTypeEnum | Defines the type of geometry into which this profile definition shall be resolved, either a curve or a surface area. In case of curve the profile should be referenced by a swept surface, in case of area the profile should be referenced by a swept area solid. | X | |
| 2 | ProfileName | IfcLabel | ? | Human-readable name of the profile, for example according to a standard profile table. As noted above, machine-readable standardized profile designations should be provided in IfcExternalReference.ItemReference. | X |
| HasExternalReference | IfcExternalReferenceRelationship @RelatedResourceObjects | S[0:?] | Reference to external information, e.g. library, classification, or document information, which is associated with the profile.
IFC4 CHANGE New inverse attribute | X | |
| HasProperties | IfcProfileProperties @ProfileDefinition | S[0:?] | Additional properties of the profile, for example mechanical properties.
IFC4 CHANGE New inverse attribute | X | |
| IfcParameterizedProfileDef | |||||
| 3 | Position | IfcAxis2Placement2D | ? | Position coordinate system of the parameterized profile definition. If unspecified, no translation and no rotation is applied. | X |
| IfcCircleProfileDef | |||||
| 4 | Radius | IfcPositiveLengthMeasure | The radius of the circle. | X | |
| # | Concept | Template | Model View |
|---|---|---|---|
| IfcProfileDef | |||
| Property Sets for Objects | Property Sets for Objects | General Usage | |
<xs:element name="IfcCircleProfileDef" type="ifc:IfcCircleProfileDef" substitutionGroup="ifc:IfcParameterizedProfileDef" nillable="true"/>
<xs:complexType name="IfcCircleProfileDef">
<xs:complexContent>
<xs:extension base="ifc:IfcParameterizedProfileDef">
<xs:attribute name="Radius" type="ifc:IfcPositiveLengthMeasure" use="optional"/>
</xs:extension>
</xs:complexContent>
</xs:complexType>
ENTITY IfcCircleProfileDef
SUPERTYPE OF(IfcCircleHollowProfileDef)
SUBTYPE OF (IfcParameterizedProfileDef);
Radius : IfcPositiveLengthMeasure;
END_ENTITY;
EXPRESS-G diagram
Link to this page