Name | Type | Description |
ConnectionType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_DuctConnectionType |
| Connection Type | The end-style treatment of the duct port:
BEADEDSLEEVE: Beaded Sleeve. COMPRESSION: Compression. CRIMP: Crimp. DRAWBAND: Drawband. DRIVESLIP: Drive slip. FLANGED: Flanged. OUTSIDESLEEVE: Outside Sleeve. SLIPON: Slipon. SOLDERED: Soldered. SSLIP: S-Slip. STANDINGSEAM: Standing seam. SWEDGE: Swedge. WELDED: Welded. OTHER: Another type of end-style has been applied. NONE: No end-style has been applied.
|
|
ConnectionSubtype |
P_SINGLEVALUE
/
IfcLabel
|
| Connection Sub Type | The physical port connection subtype that further qualifies the ConnectionType. The following values are recommended:
ACPLUG: A, B, C, D, E, F, EF, G, H, I, J, K, L, M
DIN: Mini3P, Mini4P, Mini5P, Mini6P, Mini7P, Mini8P, Mini9P
DSub: DA15, DB25, DC37, DD50, DE9, DE15
EIAJ: RC5720
HDMI: A, B, C
RADIO: IEEE802.11g, IEEE802.11n
RJ: 4P4C, 6P2C, 8P8C
SOCKET: E-11, E-12, E-14, E-17, E-26, E-27, E-39, E-40
TRS: TS_Mini, TS_SubMini, TRS_Mini, TRS_SubMini
|
|
NominalWidth |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
| Nominal Width | The nominal overall width of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
|
| 公称幅 | 呼び幅寸法。
|
|
NominalHeight |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Height | The nominal height of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
The nominal height of the duct connection. Only provided for rectangular shaped ducts.
|
|
NominalThickness |
P_SINGLEVALUE
/
IfcNonNegativeLengthMeasure
|
The nominal thickness of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.
|
DryBulbTemperature |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Dry Bulb Temperature | Dry bulb temperature of the object.
Indicates dry bulb temperature of the air.
|
|
WetBulbTemperature |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Wet Bulb Temperature | Wet bulb temperature of the air.
|
|
VolumetricFlowRate |
P_BOUNDEDVALUE
/
IfcVolumetricFlowRateMeasure
|
| Volumetric Flow Rate | The volumetric flow rate of the fluid.
|
|
Velocity |
P_BOUNDEDVALUE
/
IfcLinearVelocityMeasure
|
| Velocity | The velocity of the fluid.
|
|
Pressure |
P_BOUNDEDVALUE
/
IfcPressureMeasure
|
| Pressure | The pressure of the fluid.
|
| 圧力 | 流体の圧力。
|
|