6.2.4.17 Pset_DistributionPortTypePipe

PSET_OCCURRENCEDRIVEN / IfcDistributionPort / PIPE

Distribution Port Type PipePipe port occurrence attributes attached to an instance of IfcDistributionPort.
IfcDistributionPortオブジェクトに設定される配管ポートに関する属性情報。
Change log
ItemSPFXMLChangeDescription
IFC4 Addendum 1 4.0.1.0
    Pset_DistributionPortTypePipeMODIFIEDInstantiation changed from IfcDistributionPort/CHEMICAL to IfcDistributionPort/PIPE.
Properties

PSD-XML

NameTypeDescription
ConnectionType P_ENUMERATEDVALUE / IfcLabel / PEnum_PipeEndStyleTreatment
Connection TypeThe end-style treatment of the pipe port: BRAZED: Brazed. COMPRESSION: Compression. FLANGED: Flanged. GROOVED: Grooved. OUTSIDESLEEVE: Outside Sleeve. SOLDERED: Soldered. SWEDGE: Swedge. THREADED: Threaded. WELDED: Welded. OTHER: Another type of end-style has been applied. NONE: No end-style has been applied. USERDEFINED: User-defined port connection type. NOTDEFINED: Undefined port connection type.
接続タイプ物理ポート接続：
  • Coaxial: 同軸コネクタ.
  • DSub: D-Subコネクタ.
  • Infrared:赤外線
  • RJ: 登録済みジャック.
  • Radio: 無線
  • USB: USB.
ConnectionSubtype P_SINGLEVALUE / IfcLabel
Connection Sub TypeThe physical port connection subtype that further qualifies the ConnectionType. The following values are recommended: ACPLUG: A, B, C, D, E, F, EF, G, H, I, J, K, L, M DIN: Mini3P, Mini4P, Mini5P, Mini6P, Mini7P, Mini8P, Mini9P DSub: DA15, DB25, DC37, DD50, DE9, DE15 EIAJ: RC5720 HDMI: A, B, C RADIO: IEEE802.11g, IEEE802.11n RJ: 4P4C, 6P2C, 8P8C SOCKET: E-11, E-12, E-14, E-17, E-26, E-27, E-39, E-40 TRS: TS_Mini, TS_SubMini, TRS_Mini, TRS_SubMini
接続サブタイプ物理ポート接続のサブタイプ。接続タイプ以外の情報を設定する場合に使用。下記の値を設定：
  • DSub: DA15, DB25, DC37, DD50, DE9, DE15
  • Radio: IEEE802.11g, IEEE802.11n
  • RJ: 4P4C, 6P2C, 8P8C
  • USB: A, B, MiniA, MiniB, MicroA, MicroB
NominalDiameter P_SINGLEVALUE / IfcPositiveLengthMeasure
Nominal DiameterNominal diameter or width of the object. The nominal diameter of the pipe connection.
呼び径配管の呼び径。
InnerDiameter P_SINGLEVALUE / IfcPositiveLengthMeasure
Inner DiameterThe actual inner diameter of the object.
内径配管の実内径。
OuterDiameter P_SINGLEVALUE / IfcPositiveLengthMeasure
Outer DiameterThe actual outer diameter of the object.
外径配管の実外径。
Temperature P_BOUNDEDVALUE / IfcThermodynamicTemperatureMeasure Temperature of the fluid.
VolumetricFlowRate P_BOUNDEDVALUE / IfcVolumetricFlowRateMeasure
Volumetric Flow RateThe volumetric flow rate of the fluid.
体積流量流体の体積流量。
MassFlowRate P_BOUNDEDVALUE / IfcMassFlowRateMeasure
Mass Flow RateThe mass flow rate of the fluid.
質量流量流体の質量流量。
FlowCondition P_BOUNDEDVALUE / IfcPositiveRatioMeasure
Flow ConditionDefines the flow condition as a percentage of the cross-sectional area.
流動状態断面の充満率で流動状態を定義する。
Velocity P_BOUNDEDVALUE / IfcLinearVelocityMeasure
VelocityThe velocity of the fluid.
速度流体の速度。
Pressure P_BOUNDEDVALUE / IfcPressureMeasure
PressureThe pressure of the fluid.
圧力流体の圧力。

Link to this page  Link to this page