Item | SPF | XML | Change | Description | IFC4x2 to IFC4x3_RC1 |
---|---|---|---|---|
IfcEarthworksFillTypeEnum | ADDED |
This container defines the different predefined types of earthworks fill elements that can specify an IfcEarthworksFill.
Constant | Description |
---|---|
BACKFILL | Fill behind retaining walls or other structures such as quays, behind abutments and bridges. |
COUNTERWEIGHT | Embankment built on the side of the main road structure to reduce the settlement of the road. |
SUBGRADE | Type of earthworks element forming the structure below pavement and above natural soil. NOTE Definition from ISO 6707-1: upper part of the soil, natural or constructed, that supports the loads transmitted by the overlying structure of a road, runway, or similar hard surface. NOTE Definition from PIARC: Upper layer of the natural ground upon which the pavement is constructed. |
EMBANKMENT | Predominantly longitudinal type of earthworks element with no other particular assigned type according to its role in Pavement or Subgrade. NOTE Definition from ISO6707-1: section of earthworks, often formed by cut or fill, where the finished ground level is above or below original ground level and whose length usually greatly exceeds its width. |
TRANSITIONSECTION | Section of subgrade to ensure the consistency of stiffness and prevent uneven settlement. Transition section may appear e.g. between: embankment and bridge abutment; embankment and transverse structure; cutting and tunnel; embankment and cutting. |
SUBGRADEBED | Upper part of the soil, natural or constructed, that supports the loads transmitted by the overlying structure of a road, runway, or similar hard surface. |
SLOPEFILL | Side slope (batter) fill abutting the road structure or back slope fill. |
USERDEFINED | User-defined type |
NOTDEFINED | Undefined type. |
<xs:simpleType name="IfcEarthworksFillTypeEnum">
<xs:restriction base="xs:string">
<xs:enumeration value="backfill"/>
<xs:enumeration value="counterweight"/>
<xs:enumeration value="subgrade"/>
<xs:enumeration value="embankment"/>
<xs:enumeration value="transitionsection"/>
<xs:enumeration value="subgradebed"/>
<xs:enumeration value="slopefill"/>
<xs:enumeration value="userdefined"/>
<xs:enumeration value="notdefined"/>
</xs:restriction>
</xs:simpleType>
TYPE IfcEarthworksFillTypeEnum = ENUMERATION OF (
BACKFILL,
COUNTERWEIGHT,
SUBGRADE,
EMBANKMENT,
TRANSITIONSECTION,
SUBGRADEBED,
SLOPEFILL,
USERDEFINED,
NOTDEFINED);
END_TYPE;
References: IfcEarthworksFill