4.1.6.3.2 Standardized Profile Definition

Figure 64 illustrates an instance diagram.

Standardized Profile DefinitionIfcParameterizedProfileDefIfcProfileTypeEnumIfcLabelIfcAxis2Placement2DIfcCartesianPointIfcCartesianPointIfcDirectionIfcDirectionIfcAxis2Placement2D

Figure 64 — Standardized Profile Definition

mvdXML Specification
<?xml version="1.0" encoding="utf-8"?>
<ConceptTemplate xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" uuid="f63e9810-ac6e-43bf-9402-6ae9152b9b50" name="Standardized Profile Definition" applicableSchema="IFC4" applicableEntity="IfcParameterizedProfileDef">
  <Rules>
    <AttributeRule AttributeName="ProfileType">
      <EntityRules>
        <EntityRule EntityName="IfcProfileTypeEnum" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="ProfileName">
      <EntityRules>
        <EntityRule EntityName="IfcLabel" />
      </EntityRules>
    </AttributeRule>
    <AttributeRule AttributeName="Position">
      <EntityRules>
        <EntityRule EntityName="IfcAxis2Placement2D">
          <AttributeRules>
            <AttributeRule AttributeName="Location">
              <EntityRules>
                <EntityRule EntityName="IfcCartesianPoint" />
                <EntityRule EntityName="IfcCartesianPoint" />
              </EntityRules>
            </AttributeRule>
            <AttributeRule AttributeName="RefDirection">
              <EntityRules>
                <EntityRule EntityName="IfcDirection" />
                <EntityRule EntityName="IfcDirection" />
              </EntityRules>
            </AttributeRule>
          </AttributeRules>
        </EntityRule>
        <EntityRule EntityName="IfcAxis2Placement2D" />
      </EntityRules>
    </AttributeRule>
  </Rules>
  <SubTemplates>
    <ConceptTemplate uuid="cb6ab841-6d4f-4a4c-81e8-3cc15d415ddc" name="C-Shape Profile Definition" applicableSchema="IFC4" applicableEntity="IfcCShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Width">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WallThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Girth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="InternalFilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="58f49a6b-501c-4091-9f0d-94461c9aeedf" name="I-Shape Asymmetric Profile Definition" applicableSchema="IFC4" applicableEntity="IfcAsymmetricIShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="BottomFlangeWidth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="OverallDepth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="BottomFlangeThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="BottomFlangeFilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="TopFlangeWidth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="TopFlangeThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="TopFlangeFilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="BottomFlangeEdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="BottomFlangeSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="TopFlangeEdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="TopFlangeSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="6e083289-49f9-4762-9f5c-c17ad2adde05" name="I-Shape Profile Definition" applicableSchema="IFC4" applicableEntity="IfcIShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="OverallWidth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="OverallDepth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeEdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="5ab5115d-9303-4e49-ab12-1d304699c4c6" name="L-Shape Profile Definition" applicableSchema="IFC4" applicableEntity="IfcLShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Width">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Thickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="EdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="LegSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="4a1f45eb-4545-490d-a50f-3e2d9106aa28" name="T-Shape Profile Definition" applicableSchema="IFC4" applicableEntity="IfcTShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeWidth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeEdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebEdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="040b46df-d4d7-4457-bf8b-5084ff667791" name="U-Shape Profile Definition" applicableSchema="IFC4" applicableEntity="IfcUShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeWidth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="EdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeSlope">
          <EntityRules>
            <EntityRule EntityName="IfcPlaneAngleMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
    <ConceptTemplate uuid="0c6acada-771d-4c1a-a61d-1a2299006f06" name="Z-Shape Profile Definition" applicableSchema="IFC4" applicableEntity="IfcZShapeProfileDef">
      <Rules>
        <AttributeRule AttributeName="ProfileType">
          <EntityRules>
            <EntityRule EntityName="IfcProfileTypeEnum" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="ProfileName">
          <EntityRules>
            <EntityRule EntityName="IfcLabel" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Position">
          <EntityRules>
            <EntityRule EntityName="IfcAxis2Placement2D">
              <AttributeRules>
                <AttributeRule AttributeName="Location">
                  <EntityRules>
                    <EntityRule EntityName="IfcCartesianPoint" />
                    <EntityRule EntityName="IfcCartesianPoint" />
                  </EntityRules>
                </AttributeRule>
                <AttributeRule AttributeName="RefDirection">
                  <EntityRules>
                    <EntityRule EntityName="IfcDirection" />
                    <EntityRule EntityName="IfcDirection" />
                  </EntityRules>
                </AttributeRule>
              </AttributeRules>
            </EntityRule>
            <EntityRule EntityName="IfcAxis2Placement2D" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="Depth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeWidth">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="WebThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FlangeThickness">
          <EntityRules>
            <EntityRule EntityName="IfcPositiveLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="FilletRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
        <AttributeRule AttributeName="EdgeRadius">
          <EntityRules>
            <EntityRule EntityName="IfcNonNegativeLengthMeasure" />
          </EntityRules>
        </AttributeRule>
      </Rules>
    </ConceptTemplate>
  </SubTemplates>
</ConceptTemplate>

Link to this page  Link to this page